51
Aggregation mode Indicates the aggregation mode of the current aggregation group.
Operation key
Displays the operation key of the current aggregation group.
Port Range
Displays the port number of the current aggregation group.
8.1.1 Port Aggregation Configuration Example
Configure the topology
Configuration steps
Enter
【
Network Management
】
-
【
Trunking
】
menu bar. In the Trunking configuration
page, enable the port aggregation function, set the name of the aggregation group, select
the aggregation load mode as the source address, the aggregation mode as "dynamic LACP
aggregation", set the operation The key is 12345. Both ends of the operation key must be
the same. Set the port range to 25-26. Click <Add> to add a setting and click <Save> to make
the configuration take effect.
8.2
Port Mirroring
Port mirroring Ports a switch's data on one or more ports (VLANs) to one or more ports.
Enter
【
Network Management
】
-
【
Port Mirroring
】
menu bar. In the port mirroring page,
Summary of Contents for 221890
Page 5: ...5 1 3Board Diagram...
