EndRun Tempus LX GPS, User Manual

Page: 62 / 116

T e m p u s L X G P S U s e r M a n u a l 50
C H A P T E R S I X
51 T e m p u s L X G P S U s e r M a n u a l
C O N T R O L A N D S T A T U S C O M M A N D S
Query:
gpstrkstat
Tempus LX response:
CURRENT SVs TRKD = 08 11 13 22 31 00 00 00
gpsversion
This command displays the firmware and hardware versions of the GPS subsystem.
Query:
gpsversion
Tempus LX response:
F/W 1.00 FPGA 0202
help
This command displays a list of the Tempus LX commands (not Linux commands). To get help on a
particular command you would type
help
, followed by the command.
Query:
help
Tempus LX response: Tempux LX commands are displayed.
Query:
help gpsstat
Tempus LX response: Information specific to the
gpsstat
command is displayed.
inetdconfig
This command starts an interactive shell script that will allow the user to configure the list of proto-
col servers which are started by the
inetd
server daemon running in the Tempus LX. Four protocol
servers may be configured: TIME, DAYTIME, and TELNET. By default, the unit is configured to
start all of these protocol servers. If you need to disable start-up of some or all of these, e.g. for secu-
rity reasons, you must run this script as root from either the RS-232 serial I/O port or from a
telnet
or
ssh
session.
This script modifies the /etc/inetd.conf file, which is non-volatilely stored in the FLASH disk /boot/
etc
directory. You must re-boot the Tempus LX after running this script for the changes to take effect.
Set:
inetdconfig
Tempus LX response: Interactive shell script is started.
kplockstat
This command prints the status, either locked or unlocked, of the front-panel keypad EDIT key.
When the EDIT key is locked, it will prevent unauthorized tampering with the unit. All other keys
are still enabled so you may continue to read the status and current settings of the Tempus LX. Refer
to the
lockoutkp
and
unlockkp
commands.
Set:
kplockstat
Tempus LX response:
UNLOCKED
lockoutkp
This command locks out access to the front-panel keypad EDIT key. When the EDIT key is locked,
it will prevent unauthorized tampering with the unit. All other keys are still enabled so you may
continue to read the status and current settings of the Tempus LX. Refer to the
kplockstat
and
unlockkp
commands.
Set:
lockoutkp
Tempus LX response: Front-panel keypad EDIT key disabled.