EndRun Tempus LX GPS, User Manual

Page: 42 / 116

T e m p u s L X G P S U s e r M a n u a l 30
C H A P T E R F O U R
If you are using authentication, you can verify that authentication is being used by issuing the com-
mand
associations
to display the characteristics of the client server associations. In the “auth” column of the display,
you should see “OK” for the row corresponding to the Tempus LX server. If you see “bad”, you
should wait a few minutes to be sure that there is a problem since “bad” is the initial state of this
setting. If the “bad” indication persists then you must check your configuration for errors. Typi-
cally this is due to a typing error in creating the \windows\system32\drivers\etc\ntp.keys file on the
client that causes a mismatch between the keys being used by the server and client. (If you transfer
the file by
ftp
or
scp
, this shouldn’t be a problem.) It is also possible to have a typing error in
the
\windows\system32\drivers\etc\ntp.conf
file that causes the needed key to not be included in the
“trustedkey” list.