EndRun Tempus LX GPS, User Manual

Page: 52 / 116

T e m p u s L X G P S U s e r M a n u a l 40
C H A P T E R F I V E
Press EDIT to change the broadcast/multicast settings. Each of the edit windows has help infor-
mation available to guide you through the setup process. Note that changing the NTP multicast/
broadcast settings does not take effect until the system reboots. The new parameters are loaded to the
ntp.conf
file in the
/boot/etc/
directory. Only the broadcast line in the
ntp.conf
file is modified. The
final display in the edit sequence requires confirmation of your intent to change the instrument set-
tings. Once confirmation takes place, the instrument will reboot.
Firmware
The Firmware display is selected from the Main Menu and provides version information for the ap-
plication software running on the GPS subsystem and the NTP subsystem (Linux Root File System
and Linux Kernel). Use UP and DOWN to toggle between the information windows.
About
The About display is selected from the Main Menu and provides contact information for EndRun
Technologies. The website and toll-free phone number are listed.