R T M 3 2 0 5 U s e r M a n u a l
10
C H A P T E R T W O
11
R T M 3 2 0 5 U s e r M a n u a l
B A S I C I N S T A L L A T I O N
NOTE
You must use an RS-232 null-modem cable or adapter if you are connecting the RTM3205 to another com-
puter. The cable included in the shipping kit is a null-modem cable.
If your computer does not have a serial port, you can use a USB port with a USB-RS232 converter similar
to Gearmo GM-FTDI-8. First, connect the USB converter to your computer, then connect the converter to
the null-modem cable. Finally, connect the null-modem cable to the RTM3205.
Test the Serial Port
You must configure your terminal to use the serial I/O port you used in
Connect the RS-232 Serial
I/O Port
above. You must also configure your terminal as shown below:
• Baud Rate: 19200
• Data Bits: 8
• Parity: None
• Stop Bits: 1
• Handshaking / Flow Control: OFF (both hardware and software)
• Terminal Emulation (if any): VT100 (or similar) or Linux
After configuring these parameters in your terminal, apply power to the RTM3205. After about 20
seconds, your terminal should display something similar to this:
*************************************************************
* 6010-0066-000 Linux Bootloader v1.00 Jan 1 2013 21:24:16 *
*************************************************************
Default kernel: FACTORY
To override and boot the UPGRADE version of the kernel, type UPGRADE within 5 seconds
.....
Booting with FACTORY Kernel
Default Root File System: FACTORY
To override and boot the UPGRADE version of the Root File System, type UPGRADE within 5 seconds
.....
Booting with the FACTORY Root File System
These lines are the Linux bootloader boot prompts. These prompts will timeout after five seconds
and the factory default Linux kernel and the factory default RTM3205 root file system will be loaded.
When the Linux kernel is loaded from FLASH memory into RAM a long list of kernel-generated,
informational messages is displayed as the kernel begins execution and the various device drivers are
initialized. When the boot process completes, the RTM3205 login prompt is displayed:
********************************************************************************
* Welcome to RTM3205 GPS console on: RTM3205.your.domain
* Tue Feb 20 2013 21:47:03 UTC
********************************************************************************
RTM3205 login:
Here you may log in as “sysuser” with password “Praecis” or you may log in as the “root” user with
password “endrun_1”. When logged in as “sysuser”, you may check status information and view log
Summary of Contents for RTM3205
