Status at: May 2015
ESE 1408 DBG ES DIN
67
6.2.2 Changing the starter battery
1.
Unscrew the battery holder.
2.
Remove the battery from the battery compartment.
3.
Unscrew the battery cable. Push the protective terminal
caps back for this purpose and loosen the screws. Al-
ways disconnect the cable from the NEGATIVE terminal
first and then disconnect the cable from the POSITIVE
terminal.
Battery is disconnected.
Fig. 6-1: Replacing the battery
4.
Prepare a new battery.
5.
The battery cables must first be screwed onto the POSI-
TIVE terminal, then onto the NEGATIVE-terminal and
then put on the terminal caps.
6.
Put the battery back into the battery compartment.
7.
Put the battery holder back.
The battery has been replaced.
WARNING!
A highly explosive electrolytic gas mixture develops
from gassing when charging batteries.
Flames, sparks, an open light and smoking are prohibit-
ed.
Avoid sparks when handling cables and electrical devic-
es, as well as electrostatic discharge.
Avoid short-circuits.
WARNING!
