64
ESE 1408 DBG ES DIN
Status at: May 2015
The fuelling device is disconnected from the generator.
Connect the canister to the fuelling device as follows:
1.
Open sealing cap on the canister.
2.
Introduce hose.
3.
Engage catch on the fuelling device.
The canister is attached.
Change an empty canister during operation as follows:
1.
Place the full canister next to the empty canister.
2.
Open sealing cap on the full canister.
3.
Set the fuel cock to the internal tank
(Fig. 5-12-(2))
.
The engine is supplied with fuel over its own tank.
4.
Loosen the fuelling device latch on the canister.
5.
Remove hose.
6.
Introduce hose into the full canister.
7.
Engage catch on the fuelling device.
The canister is attached.
8.
Set the fuel cock to “external fuelling”
(Fig. 5-12-(3))
.
The empty canister is exchanged.
Fig. 5-13: Connect
up fuelling device
Connect up canister
Changing the canister
during operation
1
2
