60
ESE 1408 DBG ES DIN
Status at: May 2015
5.7 Battery charge retention device
Proceed as follows to charge the starter battery for the gen-
erator over the battery charge retention device.
The following requirements must be met:
generator is ready for operation
Connect up the battery charge conservation device
(charge current socket A DIN 14690) as follows:
Fig. 5-9: Connecting up the battery charge retention device
1.
Unscrew cover
(Fig.5-9 (2))
for socket
(Fig. 5--(1))
for the
starter battery charge conservation device.
2.
Insert plug for the external energy source (e.g. a battery
charging device) / charge retention device socket con-
necting cable and lock in place by turning to the right.
The battery charge conservation device is ready to oper-
ate.
Disconnect the battery charge conservation device as
follows:
1.
Release the plug by turning to the left and then pull the
plug for the external energy source (e.g. a battery charg-
ing device) / charge conservation device socket connect-
ing cable out.
2.
Screw on protective cap
(Fig. 5-9(2))
for charge conserva-
tion device socket.
Requirements
Connecting up the battery
charge conservation
device
