Endress+Hauser Topclean S CPC30, Operating Instructions Manual

Page: 64 / 178

6 Commissioning Topclean S
64 Hauser
Temperature compensation process (pH only):
Select temp. table
Edit table
Reference temperature
Selection
Enter / activate customer-specific temperature compensation
tables.
Select temp. table = select for activation
Select temperature table:
Medium 1
Medium 2
Medium 3
no
Select medium
No = no medium compensation
Edit table:
Medium 1
Medium 2
Medium 3
Select medium
Medium compensation curves can be entered
as a table for three different media.
02
(2 ... 10)
Entry of the number of support points (value pairs)
Value pair: pH/redox and temperature
°C
020.0 °C
025.0 °C
pH
02.00
04.00 Value pair entry
Enter pH/redox and temperature (number of required value pairs =
number of support points entered in previous field).
OK
Delete pair(s)
Selection:
Are the value pairs OK or do you want to delete pairs?
°C
020.0 °C
025.0 °C
pH
02.00
04.00
Delete:
Select the rows to be deleted, delete them with
T
and confirm
this with "E".
Table valid Note in display:
The table is active after confirmation by pressing "E". Cancel by
pressing "PARAM".
Reference temperature:
For laboratory measurement:
25.0 °C
(0 ... 100 °C)
Enter reference temperature
to which the medium temperature shall be compensated. Enter the
temperature at which the pH reference value of the process is
defined (e.g. the ambient temperature in the laboratory).
CHOICE
(default = bold) INFO
Hold pH
7. 00
[E]
Medium comp.
Next Edit[¯]
Param
Select temp. table
Edit table
Reference temperat
Hold pH
7. 00
[E]
Comp. table 1
Next Edit[ ]
Param
Medium 1
Medium 2
Medium 3
No
Hold pH
7. 00
[E]
Comp. table
Next Edit[¯]
Param
Medium 1
Medium 2
Medium 3
Hold pH
7. 00
[E]
Reference temp.
Next
Edit[ ¯®]
Param
Lab measurement
025.0
°C
-20.0... 150.0 °C