Endress+Hauser Topclean S CPC30, Operating Instructions Manual

Page: 14 / 178

3 Installation Topclean S
14 Hauser
CPG30 control unit
C07-CPC300xx-06-12-00-en-001.eps
ƒig. 6: Mounting the control unit CPG30 using wall mounting kit (contained in scope of delivery)
To mount the CPG30 control unit at the wall, proceed as follows:
1. Prepare drill holes acc. to fig. 6.
2. Screw the elements of the supplied wall fixing kit to the back panel of the housing (screws
contained in the scope of delivery).
3. Fix the housing to the wall.
Mycom S CPM153 transmitter
C07-CPM153xx-11-00-08-en-001.eps
ƒig. 7: Dimensions for wall mounting: Fixing screw: Ø 6 mm / 0.24", Wall plug: Ø 8 mm / 0.31"
1: Fixing drillholes
2: Plastic caps
1. Prepare drill holes acc. to fig. 7.
2. Push the two fixing screws from the front through the appropriate fixing bores in the
housing (1).
– Fixing screws (M6): max. Ø 6.5 mm / 0.26"
– Screw head: max. Ø 10.5 mm / 0.41"
3. Mount the transmitter housing on the wall as shown.
4. Cover the drill holes with the plastic caps (2).
154 / 6.06
100 / 3.94
247 / 9.72
142 / 5.59
167 / 5.57
Ø 8 / 0.31
2
1
mm / inch