TopCal S CPC 300
3 Installation
Hauser
11
3
Installation
3.1
Quick installation guide
1.
Ensure that the device is level when
installed. Note: the maximum suction
height for buffer / cleaner is 2 m.
2.
Remove the transport locking device
on pneumatic drive (inside of device).
3.
Screw on multihose to the bayonet
lock, ensuring it is strain-relieved and
free of kinks.
4.
Connect lines for buffer and cleaner
with connections A, B, C.
5.
Connect the compressed air supply at
the connections I (pump drive) and E
(compressed air for rinsing) at
4 - 6 bar.
Regulate the consistency (5 bar is
optimum level) via the reduction valve
supplied.
6.
Before connecting the rinsing water,
the line must be thoroughly flushed.
Connect the rinsing water at 3 - 6 bar
to connection D (pressurised water for
rinsing).
The rinsing water must be filtered with
a 100 µm particle filter.
Fig. 3:
Connections at the bottom side of the CPG 300 housing
Multihose connections:
Signal
MS1
MS2
MS3
MS4
MS5
MS6
MS7-MS10
free
Assembly in measuring position
Assembly in maintenance position
free
"Measurement" feedback (n/a with
inductive feedback)
"Maintenance" feedback (n/a with
inductive feedback)
free
Pump connections (exterior)
Medium
Inspection
:
•
Check that the compressed air and
rinsing water lines are not leaking (inside
and outside).
If you should find leaks, check the
ball
check valve
:
Open the hexagon headed bolt at D or E.
The seat of the sealing ball must be
clean. The ball must be in position above
the spring.
•
Check that the hose connection at the
black outlet valve (F) is correctly fitted.
A
B
C
D
E
F
Cleaner (suction)
Buffer 1 (suction)
Buffer 2 (suction)
Pressurised water for rinsing
Compressed air for rinsing
Output to assembly
Compressed air connections
Use
I
II
III
Pump drive
n/a for non-Ex
n/a for non-Ex
Additional valves
electrically controlled with non-Ex (switched power supply; for connec-
tion, see electrical connection diagrams)
MS 1
A
B
C
D
E
F
MS
10
I
II
III
Compressed
air
Rinse
water
Process
assembly
View from
below
Device front
Device rear
Multihose
