Endress+Hauser Teqwave F, Operating Instructions Manual

Page: 24 / 80

Operating options Teqwave F/I Modbus TCP
24 Hauser
8 Operating options
8.1 Overview of the operating options
The measuring device can be operated in the following ways:
• Operation via the local display (transmitter with touch screen)
• Operation via the "Teqwave Viewer" operating tool supplied
8.2 Access to the measuring device via the local display
If you are using the transmitter with a touch screen, it is possible to access the measuring
device via the transmitter touch screen and via the "Teqwave Viewer" operating tool.
Functions supported by the transmitter with a touch screen:
• Display and graphic visualization of measured variables
• Selection of concentration apps
• Device configuration
8.2.1 Operational display of the transmitter with a touch screen
The operational display is used to display the measured values and the sensor status. In
addition, users can access the Settings menu from this display. Select a measured variable
to switch to the graph display format.
2
1
3
4
5
A0035464-EN
 13 Operational display
1 Measured value display
2 Settings menu
3 Status indication
4 Name of the concentration app
5 Scroll bar
Measured value display
Each line shows an active measured variable, its name and the physical unit and measured
value. Users can choose from a total of three different display modes, in which three, five
or seven measured values can be displayed. If there are several measured values, users
must scroll down using the scroll bar on the right to be able see all the measured variables.