Promonitor NRF560
22
Hauser
5.7
HOME Position
After turning on the power supply, the LCD first shows the current data on the HOME position.
HOME position
The letters A, B, and C stand for the areas where information on measured values and status of the device is
displayed:
The meanings of gauge status are explained in the following table:
Area
Information
A
Current level
B
Current temperature
C
Gauge status
D
Displacer status
Gauge status
Meaning
G - RE
The displacer is resting at the reference position.
UP
The UP command has been given.
STOP
The STOP command has been given.
LIQU
The Proservo NMS5 is measuring the surface level.
U - IF
The Proservo NMS5 is measuring the upper interface level.
LIF
The Proservo NMS5 is measuring the lower interface level.
BOTM
The Proservo NMS5 is measuring the tank bottom level.
U - DE
The Proservo NMS5 is measuring the upper liquid density.
M - DE
The Proservo NMS5 is measuring the middle liquid density.
B - DE
The Proservo NMS5 is measuring the bottom liquid density.
CAN
The RELE.OVER TENS command has been given.
TEAC
The Proservo NMS5 is carrying out calibration.
blank
The Proservo NMS5 cannot detect any level.
5 Operation
