Promonitor NRF560
18
Hauser
5.2
Functions of the operating Elements
Note!
The LCD will return to the HOME position if no key is touched for more than 10 min. Digits are incremented
or decremented by "+" or "-", respectively. If you touch "+" or "-" continuously, then the minimum digit will
change first. After one cycle of the minimum, the second minimum will change. After one cycle of the second
follows the third minimum, and so on. If you take off your finger from the touch control, then the procedure
will start again from the minimum digit (Analogy of mechanical counter).
Key
Function
• Access to the programming matrix (touching the key for more than 3 s)
• Return to the HOME position (touching the key for more than 3 s)
• Moving horizontally within a function group to select functions
• Saving parameters or access code
• Moving vertically to select function groups
• Selecting or setting parameters
• Setting access code
Enter Matrix
Back
Go
Key Guide
VH:position
Group Message
Communication
Function Group Display
HOME Display
LEVEL data
Temp.data
Displacer Status Symbol
Gauge status/Error
5 Operation
