Promonitor NRF 560
Hauser
21
5.6
How to Select an Access Code
Item
Procedure
Remarks
1) In the static matrix "Switch and
error/alarm", select G0V3H9
"ACCESS CODE."
2) The default value is "0".
Keep touching "+" until you get to
"50" or "51".
3) The first digit increases to 9, then
the second digit increases.
Stop touching "+" once you reach
"50".
4)"50" is blinking. Gently
touch "+" again to increase the
second digit from 0 to 1.
Now you have 51.
5) Here touch "E"; "EDITING
ENABLED" will be displayed.
Note:
1. When you touch "E" while
displaying an access code 0,50, or
51,"EDITING LOCKED" will
appear.
2. If an access code has not been
selected before performing any
setting, the screen will
automatically change to show
"EDITING ENABLED."
Select "50" or "51",
according to the matrix table.
ST
A
TIC MA
TRIX
ACCESS CODE
0 3 9
MORE
FUNCTION
5 Operation
