Endress+Hauser Promass 84F, Technical Information

Page: 33 / 64

Proline Promass 84F
Hauser 33
Flange according to EN 1092-1 (DIN 2501) / PN 40 (with DN 25-Flanges): 1.4404/316L
Surface roughness (flange): EN 1092-1 Form B1 (DIN 2526 Form C), Ra 3.2 to 12.5 μ m
DN G L N S LK U di
8 115 440 4 × Ø14 18 85 28.5 5.35
15 115 440 4 × Ø14 18 85 28.5 8.30
All dimensions in [mm]
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N ) extension-reduction / PN 16: 1.4404/316L
Only for nominal diameter DN 250 (on request)
Surface roughness (flange): Ra 0.8 to 3.2 μ m
DN G L N S LK U di
150 285 1980 8 × Ø22 22 240 159.3 102.26
200 340 1940 12 × Ø22 24 295 207.3 102.26
300 460 1940 12 × Ø26 28 410 309.7 102.26
All dimensions in [mm]
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N ) extension-reduction / PN 40: 1.4404/316L
Only for nominal diameter DN 250 (on request)
Surface roughness (flange): Ra 0.8 to 3.2 μ m
DN G L N S LK U di
150 300 1980 8 × Ø26 28 250 159.3 102.26
200 375 1940 12 × Ø30 34 320 206.5 102.26
300 515 1940 16 × Ø33 42 450 307.9 102.26
All dimensions in [mm]
Flange according to EN 1092-1 (DIN 2501 / DIN 2512N
1)
) / PN 63: 1.4404/316L, Alloy C-22
Surface roughness (flange): EN 1092-1 Form B2 (DIN 2526 Form E), Ra 0.8 to 3.2 μ m
DN G L N S LK U di
50 180 724 4 × Ø22 26 135 54.5 26.00
80 215 875 8 × Ø22 28 170 81.7 40.50
100 250 1128 8 × Ø26 30 200 106.3 51.20
150 345 1410 8 × Ø33 36 280 157.1 68.90
250
2)
470 1890 12 × Ø36 46 400 255.4 102.26
1)
Flange with groove according to EN 1092-1 Form D (DIN 2512N) available
2)
Not available in Alloy
All dimensions in [mm]