Proline Promass 84F
60
Hauser
Certificates and approvals
CE mark
The measuring system is in conformity with the statutory requirements of the EC Directives.
Hauser confirms successful testing of the device by affixing to it the CE mark.
C-tick mark
The measuring system meets the EMC requirements of the Australian Communication and
Media Authority (ACMA).
Ex approval
Information about currently available Ex versions (ATEX, FM, CSA, IECEx, NEPSI) can be supplied by your
Hauser Sales Centre on request. All explosion protection data are given in a separate
documentation which is available upon request.
Sanitary compatibility
• 3A approval
• EHEDG tested
MODBUS RS485 certification
The measuring device meets all the requirements of the MODBUS/TCP conformity and integration test and
has the "MODBUS/TCP Conformance Test Policy, Version 2.0". The measuring device has successfully passed
all the test procedures carried out and is certified by the "MODBUS/TCP Conformance Test Laboratory" of the
University of Michigan.
Other standards and
guidelines
• EN 60529
Degrees of protection by housing (IP code)
• EN 61010-1
Protection Measures for Electrical Equipment for Measurement, Control, Regulation and Laboratory
Procedures.
• IEC/EN 61326
"Emission in accordance with Class A requirements". Electromagnetic compatibility (EMC requirements).
• NAMUR NE 21
Electromagnetic compatibility (EMC) of industrial process and laboratory control equipment.
• NAMUR NE 43
Standardization of the signal level for the breakdown information of digital transmitters with analog output
signal.
• NAMUR NE 53
Software of field devices and signal-processing devices with digital electronics
Pressure device approval
Flowmeters with a nominal diameter smaller or equal DN 25 are covered by Art. 3(3) of the European
directive 97/23/EC (Pressure Equipment Directive) and are designed according to sound engineer practice.
For larger nominal diameters, optional approvals according to Cat. II/III are available when required
(depends on fluid and process pressure).
Optionally flowmeters in accordance to the guidelines AD 2000 are available on request.
Measuring Instruments
Directive
Measuring Instruments Directive 2004/22/EG (MID)
Annex MI-002 (gas meter)
The measuring device is approved as gas meter for use under legal control (in commercial transactions) acc.
the European Measuring Instruments Directive, Annex MI-002 (DE-08-MI002-PTB014).
Annex MI-005 (liquids other than water)
• This flowmeter which is a suitable component in measuring systems subject to legal metrology controls in
accordance with Annex MI-005 of the European Measuring Instruments Directive 2004/22/EC (MID)
Note: According to the Measuring Instruments Directive, however, only the complete measuring system is
licensable, covered by an EC type-examination certificate and bears conformity marking.
• This flowmeter is qualified to OIML R117-1 and has an MID Evaluation Certificate (1) which confirms
compliance with the essential requirements of the Measuring Instruments Directive.
The Evaluation Certificate results from the WELMEC (cooperation between the legal metrology services of
the member states of the European Union and EFTA) towards voluntary modular approval for measuring
systems in accordance with Annex MI-005 (measuring systems for the continuous and dynamic
measurement of quantities of liquids other than water) of the Measuring Instruments Directive 2004/22/
EC.
