Endress+Hauser Promass 84F Technical Information Download Page 62

Page: 62 / 64

Proline Promass 84F

Hauser

Ordering Information

The EHauser service organization can provide detailed ordering information and information on the
order codes upon request.

Accessories

Various accessories, which can be ordered separately from Hauser, are available for the transmitter
and the sensor.

Documentation

• Flow measuring technology (FA005D)

• Technical Information

– Promass 84A (TI068D)
– Promass 84M (TI104D)

• Operating Instructions/Description of Device Functions

– Promass 84 (BA109D/BA110D)
– Promass 84 MODBUS (BA129D/BA130D)

• Supplementary documentation on Ex-ratings: ATEX, FM, CSA, IECEx, NEPSI

Registered trademarks

KALREZ

and VITON

Registered trademarks of E.I. Du Pont de Nemours & Co., Wilmington, USA

TRI-CLAMP

Registered trademark of Ladish & Co., Inc., Kenosha, USA

SWAGELOK

Registered trademark of Swagelok & Co., Solon, USA

HART

Registered trademark of HART Communication Foundation, Austin, USA

MODBUS

Registered trademark of the MODBUS Organization

HistoROM™, S-DAT

, T-DAT™, F-CHIP

, FieldCare

, Fieldcheck

, Applicator

Registered or registration-pending trademarks of Hauser Flowtec AG, Reinach, CH

Summary of Contents for Promass 84F

































































Search results

Summary of Contents for Promass 84F

Reviews:

Related manuals for Promass 84F

Brands by name

Popular brands

Endress+Hauser Promass 84F, Technical Information

Search results

Summary of Contents for Promass 84F

Reviews:

Related manuals for Promass 84F

Brands by name

Popular brands