Commissioning
Proline Prowirl 73
28
Hauser
Option output type
Only the output (current output or pulse/status output) not yet configured in the current
Quick Setup is offered for selection after the first cycle.
The "YES" option appears as long as a free output is still available. "NO" is the only option
displayed when no further outputs are available.
Automatic configuration of display
Selection Output type
Current output
Frequency output
Quit
Assign current
Selection frequency
Selection pulse
Selection status
QS Commisioning
Current range
Value 4 mA
Assign frequency
Assign pulse
Assign status
Value 20 mA
End value frequency
Pulse value
Switch on point
Time constant
Value f low
Pulse width
Switch off point
Failsafe mode
Value f high
Output signal
Time constant
Output signal
Failsafe mode
Time constant
Failsafe mode
Configuration another output?
YES
Option output type / NO
Automatically configuration display
Automatic configuration of display?
YES
NO
Automatic parameterization
of the display
QS Commisioning or
called up the group flow computer (only by selection: Real gas, Natural gas NX-19)
