Hardware settings
Proline Prowirl 73
20
Hauser
4
Hardware settings
This section only deals with the hardware settings needed for commissioning. All other settings
(e.g. output configuration, write protection, etc.) are described in the associated Operating
Instructions on the CD-ROM.
!
Note!
No hardware settings are needed for measuring devices with HART and
FOUNDATION Fieldbus-type communication.
4.1
Device address
Has to be set for measuring devices with the following communication methods:
• PROFIBUS PA
The device address can be configured via:
• Miniature switches
see description below
• Device functions/Operating program FieldCare
see Operating Instructions on the
CD-ROM
