Proline Prosonic Flow 91
Troubleshooting
Hauser
65
8.8
Return
"
Caution!
Do not return a measuring device if you are not absolutely certain that all traces of hazardous
substances have been removed, e.g. substances which have penetrated crevices or diffused through
plastic.
Costs incurred for waste disposal and injury (burns, etc.) due to inadequate cleaning will be charged
to the owner-operator.
The following steps must be taken before returning a flow measuring device to Hauser,
e.g. for repair or calibration:
• Always enclose a duly completed "Declaration of contamination" form. Only then can
Hauser transport, examine and repair a returned device.
• Enclose special handling instructions if necessary, for example a safety data sheet as per
EC REACH Regulation No. 1907/2006.
• Remove all residues. Pay special attention to the grooves for seals and crevices which could
contain residues. This is particularly important if the substance is hazardous to health, e.g.
flammable, toxic, caustic, carcinogenic, etc.
!
Note!
You will find a preprinted "Declaration of contamination" form at the back of these Operating
Instructions.
8.9
Disposal
Observe the regulations applicable in your country!
8.10
Software history
!
Note!
An upload or download between the individual software versions is only possible with a special
service software.
Date
Software version
Changes to software
Operating Instructions
09.2011
V 1.02.XX
New Prosonic Flow W Sensor types
71130013/09.11
02.2010
V 1.01.XX
New Prosonic Flow W Sensor types
71109049/02.10
04.2006
V 1.00.00
Original software
71024989/04.06
