Proline Prosonic Flow 91
Installation
Hauser
25
A0011376
Fig. 24:
Connecting the connecting cable
This completes the mounting process. The sensors can now be connected to the transmitter via the
connecting cables
Affixing the local display to the blind version
A local display can be temporarily affixed to devices which do not have a local display.
1.
Switch off power supply.
2.
Remove the cover of the electronics compartment.
3.
Affix local display.
4.
Switch on power supply.
Rotating the local display
1.
Unscrew cover of the electronics compartment from the transmitter housing.
2.
Remove the display module from the transmitter retainer rails.
3.
Turn the display to the desired position (max. 4 × 45° in each direction).
4.
Place the display back on the retaining rails.
5.
Screw the cover of the electronics compartment firmly back onto the transmitter housing.
A0003237
Fig. 25:
Rotating the local display
4 x 45°
