Proline Promass E 100 Modbus RS485
Diagnostics and troubleshooting
Hauser
71
12.6 Overview of diagnostic information
The amount of diagnostic information increases if the measuring device has one or
more application packages.
Diagnostics for the sensor
Diagnosti
c number
Short text
Remedial measures
Status
signal
from the
factory
Diagnostic
behavior
from the factory
022
Sensor temperature
1. Change main electronic module.
2. Change sensor.
F
Alarm
044
Sensor drift
1. Check or change main
electronics.
2. Change sensor.
S
Alarm
*
046
Sensor limit
1. Inspect sensor.
2. Check process conditions.
S
Alarm
*
062
Sensor connection
1. Change main electronic module.
2. Change sensor.
F
Alarm
082
Data storage
1. Change main electronic module.
2. Change sensor.
F
Alarm
083
Memory content
1. Restart device.
2. Restore S-DAT data.
3. Change sensor.
F
Alarm
*
Diagnostic behavior can be changed: "Adapting the diagnostic behavior" section → 70
Diagnostics for the electronics
Diagnosti
c number
Short text
Remedial measures
Status
signal
from the
factory
Diagnostic
behavior
from the factory
242
Software incompatible 1. Check software.
2. Flash or change main electronic
module.
F
Alarm
261
Electronic modules
1. Restart device.
2. Check electronic modules.
3. Change I/O module or main
electronics.
F
Alarm
270
Main electronic failure Change main electronic module.
F
Alarm
271
Main electronic failure 1. Restart device.
2. Change main electronic module.
F
Alarm
272
Main electronic failure 1. Restart device.
2. Contact service.
F
Alarm
273
Main electronic failure Replace electronics.
F
Alarm
274
Main electronic failure Replace electronics.
S
Warning
*
311
Electronic failure
1. Transfer data or reset device.
2. Contact service.
F
Alarm
*
Diagnostic behavior can be changed: "Adapting the diagnostic behavior" section → 70
Summary of Contents for Proline Promass E 100
Page 107: ......
