Safety instructions
Proline Promass 80
4
Hauser
• Hazardous areas
Measuring devices for use in hazardous areas are labeled accordingly on the nameplate.
Relevant national regulations must be observed when operating the device in hazardous
areas. The Ex documentation on the CD-ROM is an integral part of the entire device
documentation.
The installation regulations, connection data and safety instructions provided in the Ex
documentation must be observed. The symbol on the front page indicates the approval and
certification body (
0
Europe,
2
USA,
1
Canada). The nameplate also bears the
documentation number of this Ex documentation (XA***D/../..).
• For measuring systems used in SIL 2 applications, the separate manual on functional safety
(on the CD-ROM) must be observed.
• Hygienic applications
Measuring devices for hygienic applications have their own special labeling. Relevant national
regulations must be observed when using these devices.
• Pressure instruments
Measuring devices for use in systems that need to be monitored are labeled accordingly
on the nameplate. Relevant national regulations must be observed when using these devices.
The documentation on the CD-ROM for pressure instruments in systems that need to be
monitored is an integral part of the entire device documentation. The installation regulations,
connection data and safety instructions provided in the Ex documentation must be observed.
• Hauser will be happy to assist in clarifying any questions on approvals, their
application and implementation.
1.4 Safety conventions
#
Warning!
"Warning" indicates an action or procedure which, if not performed correctly, can result in injury
or a safety hazard. Comply strictly with the instructions and proceed with care.
"
Caution!
“Caution” indicates an action or procedure which, if not performed correctly, can result in
incorrect operation or destruction of the device. Comply strictly with the instructions.
Note! "Note" indicates an action or procedure which, if not performed correctly, can have an
indirect effect on operation or trigger an unexpected response on the part of the device.
