Endress+Hauser Proline Promag W 400 HART, Operating Instructions Manual

Page: 116 / 198

Operation Proline Promag W 400 HART
116 Hauser
Navigation
"Diagnostics" menu → Measured values → Output values
‣
Measured values
‣
Process variables →  116
‣
Input values →  117
‣
Output values
→  118
‣
Totalizer →  117
11.4.1 Process variables
The Process variables submenu contains all the parameters needed to display the current
measured values for each process variable.
Navigation
"Diagnostics" menu → Measured values → Process variables
‣
Process variables
Volume flow →  116
Mass flow
→  116
Conductivity →  116
Parameter overview with brief description
Parameter Prerequisite Description User interface
Volume flow – Displays the volume flow currently
measured.
Dependency
The unit is taken from the Volume flow
unit parameter (→  86).
Signed floating-point
number
Mass flow – Displays the mass flow currently
calculated.
Dependency
The unit is taken from the Mass flow
unit parameter (→  86).
Signed floating-point
number
Conductivity In the Conductivity measurement
parameter, the On option is selected.
Displays the conductivity currently
measured.
Dependency
The unit is taken from the Conductivity
unit parameter (→  86).
Signed floating-point
number