Endress+Hauser Proline Promag W 400 HART, Operating Instructions Manual

Page: 117 / 198

Proline Promag W 400 HART Operation
Hauser 117
11.4.2 "Totalizer" submenu
The Totalizer submenu contains all the parameters needed to display the current
measured values for every totalizer.
Navigation
"Diagnostics" menu → Measured values → Totalizer
‣
Totalizer
Totalizer value 1 to n
→  117
Totalizer overflow 1 to n →  117
Parameter overview with brief description
Parameter Prerequisite Description User interface
Totalizer value 1 to n One of the following options is selected
in the
Assign process variable
parameter (→  103) Totalizer 1 to n
submenu:
• Volume flow
• Mass flow
Displays the current totalizer counter
value. Signed floating-point
number
Totalizer overflow 1 to n One of the following options is selected
in the
Assign process variable
parameter (→  103) Totalizer 1 to n
submenu:
• Volume flow
• Mass flow
Displays the current totalizer overflow. Integer with sign
11.4.3 Input values
The Input values submenu guides you systematically to the individual input values.
The submenu appears only if the device was ordered with a status input →  40.
Navigation
"Diagnostics" menu → Measured values → Input values
‣
Input values
Value status input →  117
Parameter overview with brief description
Parameter Prerequisite Description User interface
Value status input For the following order code:
• "Output; input", option
I "4-20mA
HART, 2x pul./freq./switch output;
status input"
• "Output; input", option J "4-20mA
HART, certified pulse output, switch
output; status input"
Shows the current input signal level. • High
• Low