Endress+Hauser Oxymax COS61D, Operating Instructions Manual

Page: 14 / 44

Installation Oxymax COS61D
14 Hauser
5.2.2 Mounting the cleaning unit or optional protection guard
If the cleaning unit was not delivered as a pre-assembled unit or if an optionally ordered
protection guard is used:
1.
A0042840
Unscrew the standard protection guard.
 Retain the standard protection guard for possible reuse at a later stage without
the cleaning unit.
2.
A0042841
Screw on the cleaning unit or optional protection guard and tighten until the stop.
 The cleaning nozzle of the cleaning unit should now be level with the spot.
1
2
1 Cleaning nozzle
2 Spot
3.
Connect the hose for the compressed air supply (to be provided onsite) or compressor
(→  30) to the hose connection of the cleaning unit.