manualshive.com logo in svg

Endress+Hauser Micropilot FMR20, Operating Instructions Manual, Page: 62 / 102

Share
Download
Endress+Hauser Micropilot FMR20 Operating Instructions Manual Download Page 62

Accessories

Micropilot FMR20 HART

62

Hauser

FieldCare SFE500

FDT-based plant asset management tool

It can configure all smart field units in your system and helps you manage them. By using

the status information, it is also a simple but effective way of checking their status and

condition.

Technical Information TI00028S

W@M

Life cycle management for your plant

W@M supports you with a wide range of software applications over the entire process:

from planning and procurement, to the installation, commissioning and operation of the

measuring devices. All the relevant device information, such as the device status, spare

parts and device-specific documentation, is available for every device over the entire life

cycle.

The application already contains the data of your Hauser device. Hauser

also takes care of maintaining and updating the data records.
W@M is available:

www.endress.com/lifecyclemanagement

13.4   System components

Memograph M graphic data manager

The Memograph M graphic data manager provides information on all the relevant process

variables. Measured values are recorded correctly, limit values are monitored and

measuring points analyzed. The data are stored in the 256 MB internal memory and also

on an SD card or USB stick.

For details, see Technical Information TI01180R and Operating Instructions

BA01338R

RNS221

Supply unit for powering two 2-wire measuring devices. Bidirectional communication is

possible via the HART communication jacks.

For details, see Technical Information TI00081R and Brief Operating Instructions

KA00110R

RN221N

Active barrier with power supply for safe separation of 4 to 20 mA standard signal circuits.

Bidirectional HART communication is possible via integrated communication jacks

(R=250 Ω).

For details, see Technical Information TI073R and Operating Instructions BA202R

RMA42

Digital process transmitter for monitoring and displaying analog measured values

For details, see Technical Information TI00150R and Operating Instructions

BA00287R

RIA452

RIA452 digital process indicator, panel mounted housing for monitoring and displaying

analog measured values with batch and pump control functions and flow calculation

For details, see Technical Information TI113R and Operating Instructions BA00254R

HAW562

Overvoltage protection device for DIN rail as per IEC 60715, suitable for protecting

electronics against destruction as a result of overvoltage.

For details, see Technical Information TI01012K

Summary of Contents for Micropilot FMR20







































































































Reviews:

No comments