Memosens COS81E
Installation
Hauser
15
1
2
3
4
A0029064
7
Example of a measuring system with Memosens COS81E
1
Retractable assembly CPA875
2
Liquiline CM42 transmitter
3
Measuring cable CYK10
4
Oxygen sensor Memosens COS81E
5.2.2
Installing at a measuring point
Must be installed in a suitable assembly (depending on the application).
L
WARNING
Electrical voltage
In the event of a fault, non-grounded metallic assemblies may be live and as such are not
safe to touch!
‣
When using metallic assemblies and installation equipment, national grounding
provisions must be observed.
For complete installation of a measuring point, proceed as follows:
1. Install the retractable assembly or a flow assembly (if used) into the process.
2. Connect the water supply to the rinse connections (if you are using an assembly with
a cleaning function).
3. Install and connect the oxygen sensor.
Summary of Contents for Memosens COS81E
Page 2: ......
