Electrical connection
Liquiline System CAT860
22
Hauser
6.1
Cable and hose entries
1. Release a suitable cable or hose gland on the underside of the housing and remove the
dummy plug from the entry.
2. Making sure the gland is facing in the right direction, thread the gland onto the cable or hose
end and pull the cable or the hose through the entry and into the housing.
Make sure that the hose projects approx. 2 cm over the entry inside the housing.
3. Connect the cables as per the wiring diagram.
4. Lastly, tighten the cable gland or hose gland from the outside.
a0023309
1
Hose, "pump to analyzer"
4
External compressed air line
2
Hose, "filter to pump"
5
Temperature sensor (optional)
3
Power cable
Summary of Contents for Liquiline System CAT860
Page 2: ......
Page 41: ...Liquiline System CAT860 Endress Hauser W Warnings 4 Weight 38 Wiring 21 ...
Page 42: ...Liquiline System CAT860 42 ...
Page 43: ......
