Operating menu and parameter description
iTEMP TMT71
88
Hauser
User entry
–1.0 · 10
+20
to +1.0 · 10
+20
m
Factory setting
0 m
Location method
Navigation
System → Information → Device location → Location method
Description
Use this function to select the data format for specifying the geographic location. The
codes for specifying the location are based on the US National Marine Electronics
Association (NMEA) Standard NMEA 0183.
Selection
• No fix
• GPS or Standard Positioning Service (SPS) fix
• Differential PGS fix
• Precise positioning service (PPS)
• Real Time Kinetic (RTK) fixed solution
• Real Time Kinetic (RTK) float solution
• Estimated dead reckoning
• Manual input mode
• Simulation mode
Factory setting
Manual input mode
Location description
Navigation
System → Information → Device location → Location description
Description
Use this function to enter a description of the location so that the device can be located in
the plant.
User entry
Up to 32 alphanumeric characters (letters, numbers and special characters)
Factory setting
32 x '?'
Process unit tag
Navigation
System → Information → Device location → Process unit tag
Description
Use this function to enter the process unit in which the device is installed.
User entry
Up to 32 alphanumeric characters (letters, numbers and special characters)
Factory setting
32 x '?'
