iTEMP TMT71
Accessories
Hauser
43
11.2 Spare parts
Spare parts currently available for the device can be found online at:
http://www.products.endress.com/spareparts_consumables
. Always quote the serial
number of the device when ordering spare parts!
Type
Order number
Standard - DIN securing set (2 screws and springs, 4 shaft lock-down rings, 1 plug for the
display interface)
71044061
US - M4 securing set (2 screws and 1 plug for the display interface)
71044062
11.3 Return
The requirements for safe device return can vary depending on the device type and
national legislation.
1. Refer to the web page for information:
http://www.endress.com/support/return-material
Select the region.
2. Return the device if repairs or a factory calibration are required, or if the wrong
device was ordered or delivered.
11.4 Disposal
If required by the Directive 2012/19/EU on waste electrical and electronic equipment
(WEEE), the product is marked with the depicted symbol in order to minimize the
disposal of WEEE as unsorted municipal waste. Do not dispose of products bearing this
marking as unsorted municipal waste. Instead, return them to the manufacturer for
disposal under the applicable conditions.
12
Accessories
Various accessories, which can be ordered with the device or subsequently from Endress
+Hauser, are available for the device. Detailed information on the order code in question is
available from your local Hauser sales center or on the product page of the
Hauser website:
Accessories included in the scope of delivery:
• Printed version of Brief Operating Instructions in English
• ATEX supplementary documentation: ATEX Safety instructions (XA),
C
ontrol
D
rawings
(CD)
• Mounting material for head transmitter
12.1 Device-specific accessories
Accessories for the head transmitter
TID10 display unit for Hauser head transmitter iTEMP TMT8x
or TMT7x, attachable
TID10 service cable; connecting cable for service interface, 40 cm
Field housing TA30x for Hauser head transmitter
