Operation options
iTEMP TMT71
26
Hauser
3. Configure the DIP switch on the rear of the display accordingly. In general: switch to
ON = function enabled, switch to OFF = function disabled.
4. Fit the display onto the head transmitter in the correct position. The head transmitter
accepts the settings within one second.
5. Secure the cover back onto the terminal head or field housing.
Switching write protection on/off
Write protection is switched on and off via a DIP switch on the rear of the optional
attachable display. When write protection is active, parameters cannot be modified. A lock
symbol on the display indicates that write protection is on. Write protection prevents any
write access to the parameters. Write protection remains active even when the display is
removed. To deactivate write protection, the display must be attached to the transmitter
with the DIP switch switched off (WRITE LOCK = OFF). The transmitter adopts the setting
during operation and does not need to be restarted.
Turning the display
The display can be rotated 180° using the "DISPL. 180°" DIP switch.
6.2
Structure and function of the operating menu
6.2.1
Structure of the operating menu
+
+
-
Application
Measured values
Unit
Call./v. Dusen coeff. R0...
Linearization
4 mA value
System
Device management
New password
Define password
User management
Bluetooth config.
Bluetooth
Display interval
Device tag
Enter password
Password
Diagnostics
Actual diagnostics
Diagnostic list
Min/max values
Actual diagnostics list
Sensor min value
Event logbook
Previous diagnostics n
Sensor value
Alarm delay
Properties
Guidance
Commissioning
Actual Diagnostics
Simulation
Diagnostic event simulation
Diagnostic settings
Recover password
Recover password
Old password
Change password
Delete password
Delete password
Serial number
Device
Information
Latitude
Device location
Sensor
Current output
Display
A0050067
