Endress+Hauser Deltabar M PMD55, Brief Operating Instructions

Page: 22 / 28

Commissioning Deltabar M PMD55 FOUNDATION Fieldbus
22 Hauser
Selection • English
• Another language (as selected when ordering the device)
• A third language where applicable (language of the place
of manufacture)
Factory setting English
Press. eng. unit (125)
Write permission Operator/Maintenance/Expert
Description Select the pressure unit. If a new pressure unit is selected,
all pressure-specific parameters are converted and
displayed with the new unit.
Selection • mbar, bar
• mmH2O, mH2O
• inH2O, ftH2O
• Pa, kPa, MPa
• psi
• mmHg, inHg
• kgf/cm 2
Factory setting mbar or bar depending on the nominal measuring range of
the sensor, or as per order specifications.
8.1.2 Position adjustment
Corrected press. (172)
Navigation Setup → Corrected press.
Write permission Operator/Maintenance/Expert
Description Displays the measured pressure after sensor trim and
position adjustment.
Note If this value is not equal to "0", it can be corrected to "0" by
the position adjustment.