CleanFit P CPA 472
1 Safety
Hauser
3
1.4
Operational safety
The CPA 472 assembly has been designed for safety according to the state of the art
and in compliance with the applicable regulations and EC directives (see Technical Da-
ta).
However, if it is used improperly or other than for its intended purpose, it may pose a
hazard, e.g. through incorrect installation or the wrong operating conditions.
#
Warnung!
•
If the device is used for any application other than those described in this manual, it
may lead to unsafe and improper functioning of the measuring system and is therefore
not permitted.
•
Make sure you strictly adhere to the warnings and notes in these Operating Instruc-
tions.
Instructions for installation in pressurised systems
#
Warnung!
•
Do not exceed the maximum assembly operating pressure.
•
Depressurise the system before installing or removing the assembly.
•
Inspect screw unions, valves and pipes for leaks or damage on a regular basis.
1.5
Return
If the assembly has to be repaired, please return it
cleaned
to the Hauser sa-
les centre responsible. Please use the original packaging.
