Description of parameters
Cerabar S 4 to 20mA HART
18
Hauser
P01-xxxxxxxx-19-xx-xx-xx-093
Fig. 8:
DISPLAY group
1)
1)
2)
DIGITS SETS
LANGUAGE
TOTALIZER SETUP
MENU DESCRIPTION
MAIN DATA FORMAT
ALTERNATE DATA
DISPLAY CONTRAST
LANGUAGE
DISPLAY
SETTINGS
POSITION ADJUSTMENT
OPERATING MENU
GROUP SELECTION
Measured value
1) Display via on-site display only
2) Display via digital communication
Table 6: (GROUP SELECTION
) OPERATING MENU
DISPLAY
Parameter name
Description
MENU DESCRIPTOR (419)
Options
Specify contents for the main line of the onsite display in the measuring mode.
See also Operating Instructions BA00412P, Section "Onsite display".
Options:
• Main measured value (PV)
• Main measured value (%)
• Pressure
• Level
• Tank content
• Current
• Temperature
• Error number
The selection depends on the measuring mode chosen.
Factory setting:
Main measured value (PV)
MAIN DATA FORMAT (688)
Options
Specifies the number of places after the decimal point for the value displayed in the main
line.
See also Operating Instructions BA00412P, Section "Onsite display".
Options:
• Auto
• x.x
• x.xx
• x.xxx
• x.xxxx
• x.xxxxx
Factory setting:
Auto
