Endress+Hauser Cerabar S PMC71, Functional Safety Manual

Page: 10 / 48

Design Cerabar S PMP71
10 Hauser
A modification process according to IEC 61508 is applied for any device modifications.
Any exemptions from possible combinations of features are saved in the Endress
+Hauser ordering system.
Valid device versions for safety-related use:
3.1.1 Order codes
Cerabar S PMP71
Feature: 010 "Approval"
Version: all
Feature: 020 "Output; Operation"
Version:
• A: 4-20mA HART; extern. + LCD
• B: 4-20mA HART; LCD
• C: 4-20mA HART; inside
• D: 4-20mA HART; Li=0 extern. + LCD
• E: 4-20mA HART; Li=0 LCD
• F: 4-20mA HART; Li=0 inside
Feature: 030 "Housing; Cover sealing; Cable entry"
Version: all
Feature: 040 "Sensor range; Sensor overload limit"
Version: all
Feature: 050 "Calibration; Unit"
Version: all
Feature: 060 "Membrane material"
Version: all
Feature: 070 "Process connection"
Version: all
Feature: 090 "Fill fluid"
Version: all
Feature: 100 "Additional option 1"
Version: E; SIL
or
Feature: 110 "Additional option 2"
Version: E; SIL
Valid firmware version: from 02.00.zz (→ nameplate of the device)
Valid hardware version (electronics): from 02.00.ww (→ device nameplate)
3.2 Identification marking
SIL-certified devices are marked with the SIL logo on the nameplate.