Cerabar PMP23 IO-Link
Technical data
Hauser
61
16.2 Output
16.2.1 Output signal
Designation
Option
1)
IO-Link 4 to 20 mA (3- or 4-wire)
7
1)
Product Configurator, order code for "Output"
16.2.2 Switching capacity
• Switch status ON: I
a
≤ 250 mA
2)
; switch status OFF: I
a
≤1 mA
• Switch cycles: >10,000,000
• Voltage drop PNP: ≤2 V
• Overload protection: Automatic load testing of switching current;
– Max. capacitance load: 14 μF at max. supply voltage (without resistive load)
– Max. cycle duration: 0.5 s; min. t
on
: 4 ms
– Periodic disconnection from protective circuit in the event of overcurrent (f = 2 Hz) and
"F804" displayed
16.2.3 Signal range 4 to 20 mA
3.8 mA to 20.5 mA
16.2.4 Load
In order to guarantee sufficient terminal voltage, a maximum load resistance R
L
(including
line resistance) must not be exceeded depending on the supply voltage U
B
of the supply
unit.
[ ]
W
20
30
10
0
1022
587
152
U
[V]
1
2
R
R
L
L
max
max
£
-
U
6.5V
23mA
B
B
A0031107
1
Power supply 10 to 30 V DC
2
R
Lmax
Maximum load resistance
U
B
Supply voltage
• Error current is output and "S803" displayed (output: MIN alarm current)
• Periodic checking to establish if it is possible to quit fault state
2)
The SIO mode supports 250 mA, thus deviating from the IO-Link standard.
