Installation
CCS240/241
14
Hauser
‣
Ground the medium at the sensor by means of the PML pin to ensure a high reading
stability.
5.2.2
Preparing the sensor
Removing protection cap from sensor
NOTICE
Negative pressure causes damage to the sensor's membrane cap.
‣
If the protection cap is attached, carefully remove it from sensor.
1. When supplied to the customer and when in storage, the sensor is fitted with a
protection cap: First release just the top part of the protection cap by turning it.
A0037529
3
Releasing top part of protection cap by turning
2. Carefully remove protection cap from sensor.
A0037504
4
Carefully remove protection cap