Commissioning
Liquiline System CA80COD
46
Hauser
5. Return to measuring mode by pressing and holding the soft key for
ESC
for at least one
second.
Your analyzer now works with your basic settings. The sensors connected use the
factory settings of the sensor type in question and the individual calibration settings
that were last saved.
If you wish to configure your most important input and output parameters in the
Basic setup
analyzer
:
‣
Configure the current inputs, relays, limit switches, cleaning cycles and device diagnostics
with the following submenus.
7.5.2
Starting commissioning
Starting initial commissioning
‣
Start initial commissioning of the analyzer under
Menu
/
Operation
/
Maintenance
/
Commissioning
/
Start commissioning
Summary of Contents for CA80COD
Page 47: ......
