Installation
Liquiline System CA80COD
20
Hauser
A0028817
11
Securing the base
1. Screw the base to the ground.
2. Have two people lift the analyzer and place it on the base. Use the recessed grips.
3. Screw the base to the analyzer using the 6 screws supplied.
4.4
Mounting the Y strainer (optional)
The Y strainer is designed to directly tap particle-laden samples from pipes. This makes it
possible to determine COD where particles up to a certain size must also be measured.
Mounting materials are not included in the scope of supply and must be provided by the
customer.
Dimensions of Y strainer → 12
Mounting the Y strainer on an even surface
1. Mount the Y strainer on the pipe clamps on an even surface. The Y strainer should be
aligned as illustrated in .
Sticking the adhesive fittings
2. Clean the adhesive surfaces (tube end on outside, sleeve or angle piece on inside) with a
cleaning cloth.
3. Allow the cleaned surfaces to dry for approx. 5 minutes.
Summary of Contents for CA80COD
Page 47: ......
