Electrical connection
Liquiline System CA80COD
22
Hauser
5
Electrical connection
L
WARNING
Device is live
Incorrect connection may result in injury or death
‣
The electrical connection may be performed only by an electrical technician.
‣
The electrical technician must have read and understood these Operating Instructions and
must follow the instructions contained therein.
‣
Prior
to commencing connection work, ensure that no voltage is present on any cable.
‣
Before establishing the electrical connection, verify that the pre-installed power cable
meets the local national electrical safety specifications.
5.1
Connecting the analyzer
NOTICE
The device does not have a power switch
‣
You must install the device near (distance < 3 m (10 ft)) an easily accessible and fused plug
socket so that it can be disconnected from the power supply.
Compliance with the protective grounding specifications is mandatory when installing
the device.
5.1.1
Cable types
Analog, signal and transmission cables: e.g. LiYY 10 x 0.34 mm
2
5.1.2
Routing the cables
1. Remove the bottle tray (2) by lifting up the recessed grip slightly and then pulling it
towards the front.
2
A0028956
2
Bottle tray
Summary of Contents for CA80COD
Page 47: ......
