Specification
PlasmaQuant PQ 9000 (Elite)
84
10.2
Guidelines and standards
The PlasmaQuant PQ 9000 belongs to safety class I.
The housing has safety type IP 20.
The PlasmaQuant PQ 9000 conforms to the safety standards
DIN EN 61010-1 (VDE 0411T.1; IEC 61010-1)
DIN EN 61010-2-061 (IEC 61010-2-061)
The PlasmaQuant PQ 9000 has been tested for radio interference elimination and inter-
ference immunity and fulfills the requirements stipulated by
DIN EN 61326
The PlasmaQuant PQ 9000 has been tested for environmental compatibility and fulfills
the requirements stipulated by
DIN ISO 9022-3:2000
DIN ISO 9022-32-03-0
DIN ISO 9022-2:2003/01
The PlasmaQuant PQ 9000 contains restricted substances (according to guideline "Man-
agement Methods for the Restriction of the Use of Hazardous Substances in Electrical
and Electronic Products"). Analytik Jena AG guarantees, that those hazardous substances
may not leak out during the next 25 years when the device is used in accordance with its
intended purpose.
The PlasmaQuant PQ 9000 is built and tested according to standards that fulfill the re-
quirements stipulated by the EU directives 2014/35/EU and 2014/30/EU. Each device
leaves the manufacturer in a pristine and technically safe state. To maintain this condi-
tion and to ensure safe operation, the operator must strictly observe the safety and op-
erating instructions contained in this manual. For accessories which have also been sup-
plied, and system components from other manufacturers, their operating instructions
should be referred to.
Safety class and
safety type
Device safety
EMC compatibility
Environmental compati-
bility
Guidelines for Peo-
pleChina
EU directives