Contact 1.800.762.1142 for assistance.
Do not return to place of purchase.
®
Owner’s manual: model 235000 outdoor patio heater
12
Caution
Before you attempt to use a propane
cylinder, understand all cylinder
and propane related precautions in
Section #1 - “Safety First.”
Caution
Your Endless Summer Heater
has been checked at all factory
connections for leaks. Recheck
all connections, as movement in
shipping can loosen connections.
Check for leaks even if your unit was
assembled for you at the store.
Step 11 – Connect Gas Line to Cylinder
The pressure regulator and hose assembly supplied with the appliance must be used and
replacements must be those specified by the manufacturer .
• Slide full propane cylinder onto heater base .
• Attach gas line to cylinder by turning black plastic knob clockwise over cylinder valve
until tight .
Note
: be careful not to kink flexible hose of gas line .
• Secure cylinder in place by attaching loose end of cylinder restraint chain to hole in
right leg .
Step 12 – Check for Leaks
• Make 2-3 oz . Of leak check solution by mixing one part liquid dishwashing soap and
three parts water .
• Turn cylinder valve on .
• Check gas line / control valve for leaks:
• Spoon several drops of solution onto gas line and control valve connection .
• Inspect the solution at the connection to look for bubbles .
• If no bubbles appear, then the connection is secure .
• If bubbles appear, there is a leak -
• Turn cylinder valve off .
• Loosen screw on clip .
• Release gas line fitting from control valve and re-attach making sure connection is
secure (see step 8) .
• Retighten clip .
• If you continue to see bubbles after several attempts, contact
1 .800 .762 .1142 For assistance .
Check Gas Line / Cylinder valve for leaks:
• Turn cylinder valve on .
• Spoon several drops of solution onto gas line and cylinder valve connection .
• Inspect the solution at the connection to look for bubbles .
• If no bubbles appear, then the connection is secure .
• If bubbles appear, there is a leak:
• Turn cylinder valve off .
• Release gas line fitting from cylinder valve and re-attach making sure connection is
secure (see step 11) .
• If you continue to see bubbles after several attempts, contact
1 .800 .762 .1142 For assistance .
• Turn cylinder valve off .
