Contact 1.800.762.1142 for assistance.
Do not return to place of purchase.
®
Owner’s manual: model 235000 outdoor patio heater
8
Step 2 – Attach Platform to Legs
Line up hole in clip (K) with small threaded hole on bottom of platform .
Attach clip loosely to platform with large screw (B) .
Note: do not tighten until step 10 .
Using 7/16” wrench, secure platform to legs using 6 sets of large bolts (D), small lock
washers (I), and small nuts (F) . Tighten fully .
Fully tighten all nuts and bolts from step 1 .
Step 3 – Attach Weight Plate to Base
Lay base assembly on its side .
Place weight plate in base, feet out .
Insert carriage bolt (E) through center holes of base and plate .
Using 9/16” wrench, secure plate to base using a large lock washer (J) and large
nut (G) .
Place base assembly upright .
TIP:
To tighten use a 7/16” wrench on bolt and a 7/16” socket wrench on nut .
