EDM01-06: DAG 3.7D Card User Guide
©2006
13
Version 1: March 2006
Card Capture
Session (cont.)
Add –f flag
•
Add the –f flag to dagld.
dag@endace:~$ dagthree –d0
PortA: rx_monitor ds3_m13 nofcl hdlc
PortB: rx_monitor ds3_m13 nofcl hdlc
packet varlen slen=64 align64
packetA drop=0
packetB drop=0
pci 33MHz 32-bit nodrop routesource=stream0
buf=128MiB rxstreams=1 txstreams=0 mem=128:0
Configure in WYSYCC Style
If the card is configured for c-bit (ds3_cbit) framing mode but m13/23
framing is required, changing the suffix will alter the framing mode type:
dag@endace:~$ dagthree –d /dev/dag0 ds3_m13
PortA: rx_monitor ds3_m13 nofcl hdlc
PortB: rx_monitor ds3_m13 nofcl hdlc
packet varlen slen=64 align64
packetA drop=0
packetB drop=0
pci 33MHz 32-bit nodrop routesource=stream0
buf=128MiB rxstreams=1 txstreams=0 mem=128:
Summary of Contents for DAG 3.7D
