EDM01-06: DAG 3.7D Card User Guide
©2006
9
Version 1: March 2006
LED Status
The DAG 3.7D card has eight status LED’s, five coloured green, two
orange and one blue as shown below:
The LED definitions are shown below:
LED
Description
1
Burst Manager Run (orange)
2
FPGA successfully programmed . (blue)
3
Signal Detect Port A (green.
4
Not enabled
5
Signal Detect Port B (green)
6
Not enabled
7
PPS out,.
8
PPS in, . indicates card is receiving a PPS signal (green)
9
Not enabled
10
Not enabled
LED Display
Functions
On the DAG 3.7D card LED 8 flashes when a PPS signal is being received,
LED 7 flashes when a PPS signal is being outputted.
When DS3 signals are applied LEDs 3 and 5 should come on. The status of
these LEDs should not change during normal operation of the card.
LED 1 lights when a capture is in progress.
The correct LED state for the DAG 3.7D card without input signal is shown
below:
Dagthree
Utility
The
dagthree
utility supports configuration status and physical layer
interface statistics for the DAG 3.7D card.
When troubleshooting, options
–si
should be passed to the tool to watch
the operational status of the physical, PDH and framing layers. More details
about the meaning of the various bits are supplied through the help page
(
dagthree –h)
as well as via the manual page.
Synchronisation
Input
Rx A
Tx A
Rx B
Tx B
1
2
3
4
5
6
7
8
10
9
Summary of Contents for DAG 3.7D
