Encore ENDSS-R4D8, User Manual

Page: 66 / 132

ENDSS-4C8
58
3.9.4.1 Pan/Tilt/Zoom Setup
The Pan/Tilt/Zoom Setup allows you to modify the PTZ settings for each channel of the
DVR. These settings need to be matched to the camera you intend to connect to your
DVR.
PAN/TILT/ZOOM SETUP
Channel Number
PTZ Protocol [None]
Camera ID [1]
Camera Reset
Speed Adjustment
Pan Speed
▬▬▬▐▬▬ [4]
Tilt Speed
▬▬▬▐▬▬ [4]
Cruise Speed
▬▐▬▬ [1]
Auto Pan Speed
▬▬▬▐▬▬ [4]
Zoom/Focus/Iris
Channel Number
The
“PAN/TILT/ZOOM SETUP” supports individually setup of each channel.
Select the icons
“ ”, “ ”, “ ”, “ ” (for 4Ch), “ ”, “ ”, “ ”, “ ”, “ ”, “ ”, “ ”, “ ”
(for 8Ch) to individually setup of each channel.
PTZ Protocol
Provides options for the PTZ camera protocol: Pelco P, Pelco D, Teleview Pelco P,
Teleview Pelco D, Merit LILIN (3B), Merit LILIN (7B), HiSharp, Nicecam and Elitar.
Camera ID
Adjusts the identification number based on the local settings of your camera. This
value may be any number from 1 to 255. Use the arrows ( and ) to select.
Camera ID [ 1]
Speed Adjustment
These pertain to the panning, tilting, and cruising speeds of your camera.
Pan Speed: can be set between 0 to 8.
Tilt Speed: can be set between 0 to 8.
Cruise Speed: can be set between 0 to 3.
Auto Pan Speed: can be set between 0 to 5.