Encore ENDSS-R4D8 User Manual Download Page 107

Page: 107 / 132

ENDSS-R4D8

Take note of the User name, Password and Hostname.

7.2.4 Setup Router

Most of the settings for the router are identical, here is the suggestion:

Specify DYNDNS service provider: DnyDNS.org (dynamic)

Specify DYNDNS IP by DYNDNS account (user name / password )

Specify DVR IP as private IP setting

Specify one pair of connection port (control port / streaming port) , like

”80”

7.2.5 Setup DynDNS Setting on DVR

After completing, the DYNDNS account application, go to the DVR server setup menu
and input the DYNDNS information for network connection.

SERVER SETUP

□

Default DNS Address [168. 95.192. 1]

Custom DNS Address [168. 95. 1. 1]

Dynamic DNS

○

－

Activate Service                 [X Disable]
Provider                    [www.dyndns.com]
Server Name  [www.dvr-host-tw.homelinuix.net]
Account                          [example]
Password                                [123456]

Summary of Contents for ENDSS-R4D8





































































































































Search results

Summary of Contents for ENDSS-R4D8

Reviews:

Related manuals for ENDSS-R4D8

Brands by name

Popular brands

Encore ENDSS-R4D8, User Manual

Search results

Summary of Contents for ENDSS-R4D8

Reviews:

Related manuals for ENDSS-R4D8

Brands by name

Popular brands