manualshive.com logo in svg

ENCAD Encad NovaJet 1000i, Reference Manual, Page: 7 / 96

Share
Download
ENCAD Encad NovaJet 1000i Reference Manual Download Page 7

 Introduction 1-1

 

Encad 1000i Reference Guide

Introduction

Introduction

Introduction            Printer Options              Menu Tree              Technical Info           Error Messages       Troubleshooting

1

   1

This Reference Guide describes the ENCAD 1000i printer and its menu functions. In this chapter you will find an over-
view of the printer and steps for calibrating the printer after it is installed. Refer to the Quick Start Guide for setup
instructions and the Maintenance Guide for maintenance information.

The printer is a wide-format color inkjet printer that gives you professional-quality output on a wide variety of media
using either dye or pigment-based Encad inks. Designed specifically for the needs of graphics professionals who need
high productivity, this printer offers six print heads, improved drying technology, and automated ink line fill and cartridge
cleaning for "clean hands" operation. The printer is network-ready so that it can be shared by an entire office. Job tracking
and cost accounting software provide instantaneous statistics for billing, media and ink status, and project management.

Summary of Contents for Encad NovaJet 1000i

































































































Reviews:

No comments